Camshaft Position (CMP) Sensor Replacement - Bank 1 (Right) Exhaust
CAMSHAFT POSITION (CMP) SENSOR REPLACEMENT - BANK 1 (RIGHT) EXHAUSTREMOVAL PROCEDURE
1. Turn the ignition OFF.
2. Remove the power steering pressure hose bracket nut and reposition as necessary, in order to gain access.
3. Remove the camshaft position (CMP) sensor electrical connector (1).
4. Remove the CMP sensor bolt.
5. Remove the CMP sensor.
INSTALLATION PROCEDURE
1. Install the CMP sensor.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the CMP sensor bolt.
Tighten the CMP sensor bolt to 10 N.m (89 lb in).
3. Install the CMP sensor electrical connector (1).
4. Install the power steering pressure hose as necessary.