Barometric Pressure Sensor: Service and Repair
BAROMETRIC PRESSURE (BARO) SENSOR REPLACEMENTREMOVAL PROCEDURE
1. Turn the ignition OFF.
2. Remove the sensor electrical connector.
3. Remove the barometric pressure sensor bolt.
4. Remove the barometric pressure sensor.
INSTALLATION PROCEDURE
1. Install the barometric pressure sensor.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the barometric pressure sensor bolt.
Tighten
Tighten the barometric pressure sensor bolt to 10 N.m (89 lb in).
3. Install the sensor electrical connector.