Floor Air Door

FLOOR AIR DOOR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the heater outlet duct.
2. Remove the mode actuator.




3. Remove the mode door actuator mounting bracket screws.
4. Remove the mode door actuator mounting bracket.




5. Disconnect and remove the floor air door lever from the floor air door.




6. Remove the floor air door from the HVAC module.

INSTALLATION PROCEDURE




1. Install the floor air door into the HVAC module.

IMPORTANT: Align the floor air door lever slot with the pin on the mode door main lever.




2. Install the floor air door lever into the floor air door.
3. Install the mode door actuator mounting bracket.

NOTE: Refer to Fastener Notice in Service Precautions.




4. Install the mode door actuator mounting bracket screws.

Tighten
Tighten the screws to 0.9 N.m (8 lb in).

5. Install the mode actuator.
6. Install the heater outlet duct.