Instrument Panel Cluster (IPC) - Bezel Replacement

BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER

REMOVAL PROCEDURE
1. Tilt the steering wheel to the full down position.
2. Remove the left closeout/insulator panel.
3. Remove the knee bolster trim panel.




4. Remove the screws that retain the bezel to the instrument panel.
5. Remove the bezel from the instrument panel.

INSTALLATION PROCEDURE




1. Install the bezel to the instrument panel.
2. Install the screws that retain the bezel to the instrument panel.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2.5 N.m (22 lb in).

3. Install the knee bolster trim panel.
4. Install the left closeout/insulator panel.