Heater Case/Cover Replacement

HEATER CORE COVER REPLACEMENT - AUXILIARY

REMOVAL PROCEDURE
1. Remove the right rear quarter trim panel.




2. Remove the screws from the heater core cover-auxiliary (3).
3. Remove the heater core cover-auxiliary (3).

INSTALLATION PROCEDURE




1. Install the heater core cover-auxiliary (3).
2. Install the screws to the heater core cover-auxiliary.

Tighten the screws to 2 N.m (18 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the right rear quarter trim panel.