Hood Latch Replacement

Hood Latch Replacement

Removal Procedure

1. Remove the grille.




2. Using a grease pencil or other suitable marking device, mark the location of the latch on the mounting bracket.
3. Remove the bolts that retain the latch to the mounting bracket.




4. Disconnect the hood latch cable from the latch.
5. Remove the latch from the vehicle.

Installation Procedure




1. Connect the hood latch cable to the latch.




2. Position the latch to the previously marked location on the mounting bracket.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the bolts which retain the latch to the mounting bracket.

Tighten the bolts to 10 N.m (89 lb in).

4. Inspect the latch for proper operation before closing the hood.
5. Check the alignment of the latch to the hood striker. Adjust the latch, if necessary. Refer to Hood Latch Adjustment.
6. Install the grille.