Steering Wheel Theft Deterrent Lock

Steering Wheel Theft Deterrent Lock Replacement
Removal Procedure





1. Caution: Refer to Restraint Systems Caution in Service Precautions.

Disable the Restraint Systems. Refer to Restraint Systems Disabling and Enabling Zone 3 in Restraint Systems.
2. Remove the upper and lower trim covers.
3. Remove the connector (2) from the lock (1).





4. Pry the electric park lock (2) off of the ignition lock cylinder case assembly (1).

Installation Procedure





1. Snap the electric park lock (2) onto the ignition lock cylinder case assembly (1).





2. Caution: Refer to SIR Inflator Module Coil Caution in Service Precautions.

Reconnect the connector (2) to the electric park lock (1).
3. Install the upper and lower trim covers.
4. Enable the Restraint Systems. Refer to Restraint Systems Disabling and Enabling Zone 3 in Restraint Systems.