Seat Back Recliner Replacement - Rear (Bucket)

SEAT BACK RECLINER REPLACEMENT - REAR (BUCKET)

REMOVAL PROCEDURE
1. Remove the rear bucket seat.
2. Remove the outer trim panel from the rear seat cushion.
3. Remove the inner trim panel from the rear seat cushion.




4. Disconnect the cable retainer from the seat back recliner, pushing up on the retainer.




5. Remove the cable from the seat back recliner.




6. Move away the seat back cover and pad in order to expose the seat back recliner bolts.
7. Remove the bolts from the seat back recliner.
8. Remove the recliner from the seat.

INSTALLATION PROCEDURE




1. Install the seat back recliner to the seat.
2. Install the recliner seat back bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 40 N.m (30 lb ft).

3. Move the seat back cover and pad over the seat back recliner bolts.




4. Install the cable to the seat back recliner.




5. Install the cable retainer to the seat back recliner, pushing down on the retainer until fully seated.
6. Install the outer trim panel to the rear seat cushion.
7. Install the inner trim panel to the rear seat cushion.
8. Install the rear bucket seat.