Console Replacement - Front Floor

Console Replacement - Front Floor (Rendezvous)

Removal Procedure

1. Remove the front floor console trim plate. Refer to Trim Plate Replacement - Front Floor Console (Aztek) (Trim Plate Replacement - Front Floor Console)Trim Plate Replacement - Front Floor Console (Rendezvous) (Trim Plate Replacement - Front Floor Console) .
2. Disconnect the electrical connectors.




3. Remove the nuts from the side of the front floor console.
4. Remove the nuts from the rear of the front floor console.




5. Lift straight up on the front floor console and pull back in order to remove the console from the vehicle.



Installation Procedure





1. Align the front floor console to the floor.
2. Connect the required electrical connectors.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the nuts to the side of the front floor console.

Tighten the nuts to 6 N.m (53 lb in).

4. Install the nuts to the rear of the front floor console.

Tighten the nuts to 6 N.m (53 lb in).

5. Install the front floor console trim plate. Refer to Trim Plate Replacement - Front Floor Console (Aztek) (Trim Plate Replacement - Front Floor Console)Trim Plate Replacement - Front Floor Console (Rendezvous) (Trim Plate Replacement - Front Floor Console) .