Console Trim Plate Replacement - Front Floor

TRIM PLATE REPLACEMENT - FRONT FLOOR CONSOLE

REMOVAL PROCEDURE
1. Lift the armrest cover and place the cover in the locked position.




2. Remove the cup holder liners.
3. Remove the cup holder screws.
4. Remove the power accessory liner.
5. Remove the liner screws.
6. Disconnect the electrical connectors from the trim plate.
7. Remove the trim plate assembly.

INSTALLATION PROCEDURE




1. Connect the electrical connectors to the trim plate.
2. Install the trim plate assembly.
3. Install the trim plate screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

4. Install the cup liners.
5. Install the power accessory liners.
6. Close the armrest cover.