Coolant Heater Cord Replacement

Coolant Heater Cord Replacement (LY7)
Removal Procedure





1. Remove the air inlet duct.
2. Remove the coolant (block) heater cord from the transmission fill tube.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the catalytic converter.
5. Remove the engine coolant (block) heater cord from the engine coolant heater.
6. Remove the engine coolant (block) heater cord.

Installation Procedure





1. Install the engine coolant (block) heater cord above the transmission.
2. Install the engine coolant (block) heater cord to the engine coolant heater.
3. Install the catalytic converter.
4. Lower the vehicle.
5. Install the coolant (block) heater cord to the transmission fill tube.
6. Install the air inlet duct.