Oil Level Sensor: Service and Repair

Engine Oil Level Sensor and/or Switch Replacement
Removal Procedure





1. Drain the engine oil.
2. Disconnect the electrical connector from engine oil level switch.





3. Remove the engine oil level switch from the oil pan.

Installation Procedure





Notice: Refer to Fastener Notice in Service Precautions.

1. Install the engine oil level switch to the oil pan.
^ Tighten the engine oil level switch to 20 Nm (15 ft. lbs.).





2. Connect the electrical connector to engine oil level switch.
3. Fill the engine oil.
4. Inspect for oil leaks.