Camshaft Bearing

Camshaft Bearing Cap bolts
Tighten the bolts in the sequence shown.
Tighten in sequence to 10 Nm (89 inch lbs.).
Loosen the center intake camshaft bearing cap bolts 1, 2 and the center exhaust camshaft bearing cap bolts 3, 4.
Retighten the center camshaft bearing cap bolts 1, 2, 3, 4.
Retighten the camshaft bearing cap bolts to 10 Nm (89 inch lbs.).
Camshaft
Camshaft Bearing Inside Diameter - Front Number 1 35.000-35.020 mm (1.3779-1.3787 inch)
Camshaft Bearing Inside Diameter - Middle and Rear Number 2-4 27.000-27.020 mm (1.0630-1.0638 inch)