Connecting Rod, Engine

Connecting Rod Bolt
First Pass 30 Nm (22 ft. lbs.)
Second Pass - Counter Clockwise Back Off to Zero
Third Pass 25 Nm (18 ft. lbs.)
Final Pass 110 Degrees Coolant Outlet Bolt 10 Nm ( 89 inch lbs.)
Connecting Rod Bore Diameter - Bearing End 59.620-59.636 mm (2.3472-2.3479 inch)
Connecting Rod Bore Diameter - Pin End 24.007-24.021 mm (0.9452-0.9457 inch)
Connecting Rod Length - Center to Center 150.400 mm (5.9212 inch)
Connecting Rod Side Clearance 0.095-0.355 mm (0.0374-0.0140 inch)
Connecting Rod Width - Bearing End
Production 21.775 mm (0.8573 inch)
Service 21.725-21.825 mm (0.8553-0.8593 inch)
Connecting Rod Width - Pin End
Production 21.775 mm (0.8573 inch)
Service 21.725-21.825 mm (0.8553-0.8593 inch)
Crankshaft
Connecting Rod Journal Diameter 55.992-56.008 mm (2.2044-2.2050 inch)
Connecting Rod Journal Out-of-Round 0.005 mm (0.0002 inch)
Connecting Rod Journal Taper 0.005 mm (0.0002 inch)
Connecting Rod Journal Width
Production 22.000 mm (0.8661 inch)
Service 21.920-22.080 mm (0.8630-0.8693 inch)