Receiver Replacement - Digital Radio

RECEIVER REPLACEMENT - DIGITAL RADIO

REMOVAL PROCEDURE




1. Remove the left instrument panel (I/P) insulator.

IMPORTANT: Do not exchange digital radio receivers between vehicles. Exchanging digital receivers between vehicles will activate the digital radio Theftlock. "XM Theftlock" will be displayed.




2. Remove the receiver bracket nuts.
3. Remove the receiver from the bracket.
4. Disengage the electrical connector and the antenna connectors from the XM radio receiver.




5. Remove the XM digital radio receiver from the vehicle.

INSTALLATION PROCEDURE




1. Install the XM digital radio receiver to the receiver bracket.
2. Install the radio receiver nuts.

Tighten the nuts to 4 N.m (35 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.




3. Connect the electrical connectors and the antenna connectors to the XM radio receiver.




4. Install the left I/P insulator.
5. Perform the setup procedure for the digital radio receiver. Refer to Digital Radio Receiver Programming and Setup.