Crankshaft, Engine

Connecting Rod Bearing Cap Bolt
^First Pass 25 Nm (18 ft. lbs.)
^Final Pass 110 degrees

Crankshaft Balancer Bolt
First pass 70 Nm (52 ft. lbs.)
Final pass 70 degrees

Crankshaft Main Bearing Cap Bolt
First pass 50 Nm (37 ft. lbs.)
Final pass 77 degrees

Block
Crankshaft Main Bearing Bore Diameter 72.1535-72.1695 mm (2.840-2.841 inch)
Crankshaft Main Bearing Bore Out-of-Round 0.008 mm (0.00031 inch)

Crankshaft
Connecting Rod Journal Diameter 57.122-57.138 mm (2.248-2.249 inch)
Connecting Rod Journal Out-of-Round 0.005 mm (0.0002 inch)
Connecting Rod Journal Taper 0.008 mm (0.0003 inch)
Connecting Rod Journal Width 21.92-22.08 mm (0.863-0.869 inch)
Crankshaft End Play 0.060-0.210 mm (0.0024-0.0083 inch)
Crankshaft Main Bearing Journal Width 23.9-24.1 mm (0.941-0.949 inch)
Crankshaft Main Bearing Clearance 0.019-0.064 mm (0.0008-0.0025 inch)
Crankshaft Main Journal Diameter 67.239-67.257 mm (2.6473-2.6483 inch)
Crankshaft Main Journal Out-of-Round 0.005 mm (0.0002 inch)
Crankshaft Main Journal Taper 0.008 mm (0.0003 inch)
Crankshaft Rear Flange Runout 0.04 mm (0.0016 inch)