Fog/Driving Lamp: Service and Repair

FOG LAMP REPLACEMENT - FRONT

REMOVAL PROCEDURE




1. Remove the fog lamp bulb and socket.




2. Remove the 2 push-pins (1) that retain the fog lamp to the fog lamp bracket.

IMPORTANT: The fog lamp bracket is permanently attached to the fascia. Do not remove the fog lamp bracket from the fascia, replace only the fog lamp.

3. Remove the aim adjustment screw (2) from the fog lamp.
4. Remove the fog lamp from the fog lamp bracket.

INSTALLATION PROCEDURE




1. Position the fog lamp to the fog lamp bracket.
2. Install the 2 push-pins (1) that retain the fog lamp to the fog lamp bracket.
3. Install the aim adjustment screw (2) to the fog lamp.




4. Install the fog lamp bulb and socket.
5. Aim the fog lamp(s). Refer to Fog Lamp Aiming Procedure .