Cylinder Head Replacement - Right

Cylinder Head Replacement - Right

Removal Procedure





1. Remove the oil level indicator.
2. Remove the coolant air bleed pipe.
3. Remove the right exhaust manifold.
4. Remove the pushrods.
5. If equipped, remove the auxiliary air conditioning (A/C) bracket nut (2).
6. Remove the cylinder head.
7. Clean and inspect the cylinder head.

Installation Procedure

1. Install the cylinder head.





Notice: Refer to Fastener Notice in Service Precautions.

2. If equipped, install the auxiliary air conditioning (A/C) bracket nut (2).
^ Tighten the nut to 20 Nm (15 ft. lbs.).
3. Install the pushrods.
4. Install the right exhaust manifold.
5. Install the coolant air bleed pipe.
6. Install the oil level indicator.