Console Replacement - Overhead

CONSOLE REPLACEMENT - OVERHEAD

REMOVAL PROCEDURE




1. Open the OnStar(R) door panel from the overhead console.
2. Disconnect the OnStar(R) electrical connectors.
3. Remove the screws from the overhead console.




4. Open the garage door panel and remove the screws.
5. Disconnect the electrical connectors.
6. Remove the overhead console from the vehicle.

INSTALLATION PROCEDURE




1. Connect the electrical connectors for the garage door and the OnStar(R) consoles.
2. Install the overhead console to the vehicle.




3. Install the overhead console screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

4. Close the garage door panel and the OnStar(R) door on the overhead console.