Instrument Panel (I/P) Multifunction Switch Assembly Replacement

INSTRUMENT PANEL (I/P) MULTIFUNCTION SWITCH ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE




1. Remove the front floor console.



2. Remove the bolts from the switch assembly.




3. Remove the electrical connectors from the switch assembly.
4. Remove the switch assembly.

INSTALLATION PROCEDURE




1. Install the electrical connections to the switch assembly.




2. Install the bolts to the switch assembly of the rear object alarm module.

NOTE: Refer to Fastener Notice.

Tighten the bolts to 2 N.m (18 lb in).




3. Install the front floor console.