Trim Plate Replacement - Console Rear

TRIM PLATE REPLACEMENT - CONSOLE REAR

REMOVAL PROCEDURE




1. Open the armrest.
2. Remove the two screws that hold the trim plate.




3. Pull on the trim plate to release the clips.
4. Disconnect the trim plate electrical connections.
5. Remove the trim plate.

INSTALLATION PROCEDURE




1. Connect the electrical connections.
2. Press the trim plate to the console until the plate is fully seated.




3. Install the trim plate screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

4. Close the armrest.