Striker Replacement - Instrument Panel (I/P) Compartment

STRIKER REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT

REMOVAL PROCEDURE
1. Open the instrument panel (IP) compartment.




2. Remove the bolts that secure the IP compartment striker.
3. Remove the IP compartment striker.

INSTALLATION PROCEDURE




1. Install the IP compartment striker and bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the fasteners to 2 N.m (18 lb in).

2. Close the IP compartment.
3. Inspect the IP compartment for the proper alignment and adjust as necessary.