Striker Replacement - Instrument Panel (I/P) Compartment

Striker Replacement - Instrument Panel (I/P) Compartment

Removal Procedure

1. Open the instrument panel (IP) compartment.




2. Remove the bolts that secure the IP compartment striker.
3. Remove the IP compartment striker.



Installation Procedure


Notice: Refer to Fastener Notice in Cautions and Notices.





1. Install the IP compartment striker and bolts.

Tighten the fasteners to 2 N.m (18 lb in).

2. Close the IP compartment.
3. Inspect the IP compartment for the proper alignment and adjust as necessary.