Seat Replacement - Rear No. 2

SEAT REPLACEMENT - REAR NO. 2

REMOVAL PROCEDURE
1. Remove the rear storage compartment.
2. Roll the second row seats forward.




3. Remove the front anchor nuts from the rear No. 2 seat.




4. Remove the seat.

INSTALLATION PROCEDURE




1. Install the rear seat to the mounting studs.




2. Install the front anchor nuts to the mounting studs on the rear seat.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the nuts to 50 N.m (37 lb ft)

3. Move the second row seat to the original position.
4. Install the storage compartment.