Seat Back Cover Replacement - Rear (Split Bench)

SEAT BACK COVER REPLACEMENT - REAR (SPLIT BENCH)

REMOVAL PROCEDURE
1. Remove the rear split bench seat.
2. Remove the rear seat back trim panel.
3. Remove the rear seat back from the rear seat.
4. Remove the rear seat headrest.



5. Remove the J-hook retainer at the bottom of the seat back cover.




6. Pull out the rear seat back cover end flaps.




7. Remove the hog rings from the rear seat back cover to the pad.
8. Remove the hook and the loop retainers securing the rear seat back cover to the pad.




9. Remove the rear seat back cover from the seat back, by pulling the seat back cover up and over the pad.




10. Remove the rear seat back cover from the pad.

INSTALLATION PROCEDURE




1. Install the rear seat back cover to the pad.




2. Install the rear seat back cover to the seat back, by pulling the seat back cover down and over the pad.




3. Install the hog rings to the rear seat back cover to the pad.




4. Install the J-hook retainer at the bottom of the seat back cover.
5. Install the hook and the loop retainers securing the rear seat back cover to the pad.
6. Install the rear seat back trim panel.
7. Install the rear seat back to the rear seat.
8. Install the rear seat headrest.
9. Install the rear seat back trim panel.
10. Install the rear split bench seat.