Lumbar Adjuster Support Replacement - Manual

LUMBAR ADJUSTER SUPPORT REPLACEMENT - MANUAL

REMOVAL PROCEDURE
1. Remove the front bucket seat.
2. Remove the outer trim panel.



3. Remove the lumbar control cable from the lumbar control.

IMPORTANT: The lumbar support must be in the relaxed position to disconnect the lumbar support cable.




4. Remove the screws from the lumbar control.
5. Remove the lumbar control from the seat cushion frame.

INSTALLATION PROCEDURE




1. Install the lumbar control to the seat cushion frame.
2. Install the screws to the lumbar control.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 10 N.m (89 lb in).




3. Install the lumbar control cable to the lumbar control.
4. Install the outer trim panel.
5. Install the front bucket seat.