Trim Plate Replacement - Instrument Panel (I/P) Accessory

TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY

REMOVAL PROCEDURE
1. Position the floor shifter in the Drive position.
2. Remove the front floor console.
3. Remove 2 screws from the lower trim plate.




4. Remove the instrument panel (I/P) accessory trim plate by releasing the retainers.
INSTALLATION PROCEDURE




1. Align the retainers on the I/P accessory trim plate to the slots in the I/P.
2. Install the retainers into the slots until the retainers are fully seated.
3. Install the 2 screws to the lower trim plate.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

4. Install the front floor console.