Diagnostic System Check - Tire Pressure Monitoring
Diagnostic System Check - Tire Pressure MonitoringTest Description
The numbers below refer to the step numbers on the diagnostic table.
2. The lack of communication may be caused by a partial or a total malfunction of the circuit containing the class 2 serial data. The specified procedure will determine the particular condition.
3. The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will collect all the available information before tests are performed.
4. The presence of ABS DTCs could cause the Tire Pressure Monitor (TPM) system to be disabled, which is controlled by the Electronic Brake Control Module (EBCM).
Steps 1 - 4:
