Power Sliding Door (PSD) Inoperative

POWER SLIDING DOOR (PSD) INOPERATIVE

TEST DESCRIPTION

Step 1 - Step 10:

Step 11 - Step 14:

The number below refers to the step number on the diagnostic table.
3. This step helps to determine if the ground circuit to the enable/disable and open/close switches in the overhead console has failed. If this circuit opens between splice S388 and body ground G302, the left and right power sliding door (PSD) will only open and close properly while using the keyless entry transmitter. However, the left PSD could be closed, but not opened, using the left B-Pillar switch.