Cylinder Head Assembly

Cylinder Head
Surface Flatness - Block Deck 0.08 mm (Per 152 mm (0.003 inch) Per 6 inch)
Surface Flatness - Exhaust Manifold Deck 0.1 mm (0.004 inch)
Surface Flatness - Intake Manifold Deck 0.1 mm (0.004 inch)

Camshaft Sprocket Bolt 140 Nm (103 ft. lbs.)





Cylinder Head Bolt

Important: Install new cylinder head bolts

First Pass 60 Nm (44 ft. lbs.)
Final Pass 95 degrees

Exhaust Manifold Nut 16 Nm (12 ft. lbs.)
Exhaust Manifold Stud 18 Nm (13 ft. lbs.)





Lower Intake Manifold Bolt - Center 20 Nm (15 ft. lbs.)
Lower Intake Manifold Bolt - Corner 25 Nm (18 ft. lbs.)
Upper Intake Manifold Bolt/Stud 25 Nm (18 ft. lbs.)