Instrument Panel (I/P) Harness Replacement

Instrument Panel (I/P) Harness Replacement

Removal Procedure

1. Disable the SIR. Refer to SIR Disabling and Enabling Zone 3 and SIR Disabling and Enabling Zone 5.
2. Remove the instrument panel (I/P). Refer to Instrument Panel (I/P) Assembly Replacement (Service and Repair) .
3. Disconnect the wiring harness connectors under the I/P.
4. Disconnect the wiring harness connectors under the hood.




5. Pull on the wiring harness (2) in order to release the retainers.
6. Remove the wiring harness (2).



Installation Procedure





1. Align the wiring harness retainers.
2. Push in on the wiring harness (2) until the harness is secure.

Important: Ensure that the electrical connectors are routed correctly through the instrument panel.


3. Install the I/P. Refer to Instrument Panel (I/P) Assembly Replacement (Service and Repair) .
4. Connect the wiring harness connectors under the I/P.
5. Connect the wiring harness connectors under the hood.
6. Enable the SIR. Refer to SIR Disabling and Enabling Zone 3 and SIR Disabling and Enabling Zone 5.