Chain Cover Replacement - Sit-N-Lift

CHAIN COVER REPLACEMENT - SIT-N-LIFT

REMOVAL PROCEDURE
1. Extend the seat out from the vehicle.




2. Remove the fasteners from the rear of the seat.




3. Remove the screws from the roll-up chain cover.
4. Remove the chain cover.

INSTALLATION PROCEDURE




1. Install the roll-up chain cover.
2. Install the screws to the chain cover.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).




3. Install the fasteners to the rear of the seat.
4. Return the seat to the vehicle.
5. Test the seat for proper operation.