49. Camshaft Position Actuator Magnet Cleaning and Inspection

This article or image reflects the changes called out in TSB#05-06-01-027

Dated 09/16/05

For the following vehicles 2006 Buick Terraza,2006 Chevrolet Impala, Malibu, SS, Malibu Maxx, Monte Carlo, Uplander, 2006 Pontiac G6, Montana SV6 and 2006 Saturn Relay with 3.5 L or 3.9 L ( VIN's N, K, 1 & RPO's LZ$, LZE, And LZ9).


Notice: Use only a Torx Plus bit when removing or Installing Camshaft Position Actuator retention fasteners.



Camshaft Position Actuator Magnet Cleaning and Inspection





1. Inspect the camshaft position actuator magnet for the following conditions:
^ The camshaft position actuator magnet wiring connector (1) for damage.
^ The camshaft position actuator magnet O-ring seal and sealing area (2) for damage.
2. Repair or replace the camshaft position actuator housing and/or components as necessary.