Tilt Lever Replacement

Tilt Lever Replacement

Removal Procedure
1. Disable the Restraint system. Refer to Restraint Disabling and Enabling Zone 3.
2. Remove the lower trim cover.
3. Remove the tilt lever spring (2).
4. Remove the retaining bolt (3) from the tilt lever.





5. Remove the tilt lever (1).

Installation Procedure





1. Install the tilt lever (1).

2. Notice:
Refer to Fastener Notice in Service Precautions.

Install the retaining bolt (3) to the tilt lever.

Tighten the bolt to 10 Nm (89 inch lbs.).

3. Install the tilt lever spring (2).
4. Install the lower trim cover.
5. Enable the Restraint system. Refer to Restraint Disabling and Enabling Zone 3.