Trunk / Liftgate Hinge: Service and Repair

Liftgate Hinge Replacement

Removal Procedure





1. Remove the liftgate. Refer to Liftgate Replacement .
2. Mark the location of the liftgate hinges with a grease pencil.
3. Remove the nuts from the liftgate hinges.

Important: Mark the location of the shims right and/or left for reinstallation.

4. Remove the liftgate hinges with the shims and seals from the vehicle.

Installation Procedure





1. Position the liftgate hinges with the shims and seals to the location marks on vehicle.

Notice: Refer to Fastener Notice .

2. Install the nuts to the liftgate hinges.

Tighten the liftgate hinge nuts to 33 N.m (28 lb ft).

3. Install the liftgate. Refer to Liftgate Replacement .