Front Floor Console Replacement

Front Floor Console Replacement

Removal Procedure

1. Remove the front floor console trim plate. Refer to Front Floor Console Trim Plate Replacement (Rendezvous) .
2. Disconnect the electrical connectors.




3. Remove the nuts from the side of the front floor console.
4. Remove the nuts from the rear of the front floor console.




5. Lift straight up on the front floor console and pull back in order to remove the console from the vehicle.

Installation Procedure





1. Align the front floor console to the floor.
2. Connect the required electrical connectors.





Notice: Refer to Fastener Notice .

3. Install the nuts to the side of the front floor console.

Tighten the nuts to 6 N.m (53 lb in).

4. Install the nuts to the rear of the front floor console.

Tighten the nuts to 6 N.m (53 lb in).

5. Install the front floor console trim plate. Refer to Front Floor Console Trim Plate Replacement (Rendezvous) .