Rear Seat Back Cover Replacement (Bucket)

Rear Seat Back Cover Replacement (Bucket)

Removal Procedure

1. Remove the rear bucket seat. Refer to Seat Replacement - Rear Bucket .
2. Remove the rear seat back trim panel. Refer to Trim Panel Replacement - Rear Seat Back .
3. Remove the rear seat back from the front seat. Refer to Seat Back Replacement - Rear (Bucket) Seat Back Replacement - Rear (Split Bench) .
4. Remove the rear seat headrest. Refer to Rear Seat Head Restraint Replacement .




5. Remove the J-hook retainer at the bottom of the seat back cover.




6. Pull out the rear seat back cover end flaps.
7. Remove the hook and the loop retainers securing the rear seat back cover to the pad.




8. Remove the rear seat back cover from the seat back, by pulling the seat back cover up and over the pad.




9. Remove the hog rings from the rear seat back cover to the pad.
10. Remove the rear seat back cover from the pad.

Installation Procedure





1. Install the rear seat back cover alignment mark to the alignment mark on the pad.
2. Install the hog rings to the rear seat back cover to the pad.
3. Install the seat back cover over the pad and alining the hook and the loop retainers.
4. Install the hook and the loop retainers, securing the rear seat back cover to the pad.




5. Install the rear seat back cover end flap.




6. Install the J-hook retainer at the bottom of the seat back cover.
7. Install the rear seat back to the rear seat. Refer to Seat Back Replacement - Rear (Bucket) Seat Back Replacement - Rear (Split Bench) .
8. Install the rear seat headrest. Refer to Rear Seat Head Restraint Replacement .
9. Install the rear seat back trim panel. Refer to Trim Panel Replacement - Rear Seat Back .
10. Install the rear bucket seat. Refer to Seat Replacement - Rear Bucket .