Seat Back Replacement - Rear (Bucket)

Seat Back Replacement - Rear (Bucket)

Removal Procedure

1. Remove the rear bucket seat. Refer to Seat Replacement - Rear Bucket .
2. Remove the outer trim panel from the rear seat cushion. Refer to Seat Cushion Outer Trim Panel Replacement - Rear Seat (Bucket) Seat Cushion Outer Trim Panel Replacement - Rear Seat (Split Bench) .
3. Remove the inner trim panel from the rear seat cushion. Refer to Seat Cushion Inner Panel Replacement - Rear .




4. Remove the bolts from the seat back recliner hinges.




5. Remove the seat back from the seat cushion.

Installation Procedure





1. Place the rear seat back to the rear seat cushion frame.

Notice: Refer to Fastener Notice .




2. Install the bolts to the seat back recliner hinges.

Tighten the bolts to 40 N.m (30 lb ft).

3. Install the outer trim panel to the rear seat cushion. Refer to Seat Cushion Outer Trim Panel Replacement - Rear Seat (Bucket) Seat Cushion Outer Trim Panel Replacement - Rear Seat (Split Bench) .
4. Install the inner trim panel to the rear seat cushion. Refer to Seat Cushion Inner Panel Replacement - Rear .
5. Inspect the seat back for proper operation.
6. Install the rear bucket seat. Refer to Seat Replacement - Rear Bucket .