Front Seat Armrest Replacement

Front Seat Armrest Replacement

Removal Procedure





1. Remove the armrest bolt trim cap using a small flat-bladed tool.




2. Remove the bolt from the armrest.
3. Remove the armrest from the front bucket seat.

Installation Procedure





1. Position the bolt into the mounting point of the armrest.




2. Position the armrest to the front bucker seat.

Notice: Refer to Fastener Notice .

3. Tighten the armrest mounting bolt.

Tighten the armrest mounting bolt to 4.5 N.m (40 lb in).


Important: Rotate the armrest bolt trim cap to a new position to allow the retainer on the cap to seat properly.





4. Install the armrest bolt trim cap pressing into place until fully seated.
5. Inspect the armrest for proper movement.