Seat Replacement - Rear Bucket

Seat Replacement - Rear Bucket

Removal Procedure

1. Place the rear bucket seat back fully forward.




2. Pull the release strap on the back side of the rear seat adjuster or pull the release handle on the side of the rear seat in order to release the adjuster from the floor.
3. Lift the rear of the seat fully upwards and forward.
4. Lift the rear seat from the anchor plate.
5. Remove the rear sear from the vehicle.

Installation Procedure

1. Place the rear seat to the anchor plates.




2. Install the front seat adjuster latches into the anchor plate.
Ensure that the latch is hooked on both pins.
3. Tilt the rear seat assembly down and latch the rear seat adjusters into the floor.
4. Place the rear seat to the original position.