Knee Bolster Replacement

Knee Bolster Replacement

Removal Procedure

1. Remove the I/P insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side and Instrument Panel Insulator Panel Replacement - Left Side .




2. Remove the bolts from the bottom of the knee bolster.
3. Pull on the knee bolster in order to release the upper clips.

Installation Procedure





1. Perform the following steps in order to install the knee bolster to the instrument panel:

1. Align the clips with the slots in the instrument panel.
2. Push in, in order to secure the knee bolster.

Notice: Refer to Fastener Notice .

2. Install the bolts to the bottom of the knee bolster.

Tighten the bolts/screws to 2.5 N.m (22 lb in).

3. Install the I/P insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side and Instrument Panel Insulator Panel Replacement - Left Side .