Headlamp Switch: Service and Repair

Headlamp Switch Replacement

Removal Procedure




1. Remove the instrument panel (I/P) cluster trim plate bezel.
2. Grasp the headlamp switch and pull firmly to release the retaining tabs from the I/P carrier.




3. Disconnect the electrical connector from the headlamp switch.
4. Remove the headlamp switch.

Installation Procedure




1. Connect the electrical connector to the headlamp switch.




2. Position the headlamp switch to the retainers in the I/P carrier.
3. Install the headlamp switch to the I/P carrier. Press the switch into place until fully seated.
4. Install the I/P cluster trim plate bezel.