Heater Inlet Hose Replacement

Heater Inlet Hose Replacement

Tools Required

GE-47622 Hose Clamp Pliers

Removal Procedure

1. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill).
2. Remove the wiper motor module assembly.
3. Disconnect the vacuum hose from the brake booster and reposition.
4. Remove the air cleaner outlet duct.
5. Remove the transmission fluid filler tube.




6. Disconnect the inlet heater hose (1) from the inlet heater pipe (2).




7. Disconnect the heater hose clamp using the GE-47622.
8. Disconnect the inlet heater hose from the heater core.
9. Remove the inlet heater hose.

Installation Procedure

1. Install the inlet heater hose.




2. Connect the inlet heater hose to the heater core.
3. Connect the heater hose clamp using the GE-47622.




4. Connect the inlet heater hose (1) to the inlet pipe (2).
5. Install the transmission fluid filler tube.
6. Install the air cleaner outlet duct.
7. Connect the vacuum hose to the brake booster.
8. Install the wiper motor module assembly.
9. Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill).