Rear Suspension

Wheel Bearing/Hub Replacement - Rear

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the knuckle.




4. Remove the wheel bearing/hub assembly knuckle bolts (1).




5. Remove the wheel bearing/hub assembly (1) from the knuckle (2).

Installation Procedure




1. Install the wheel bearing/hub assembly (1) on to the knuckle (2).





Notice: Refer to Fastener Notice.

2. Install the bolts (1) into the wheel bearing/hub assembly.

Tighten the wheel bearing/hub bolts to 130 N.m (96 lb ft).

3. Install the knuckle.
4. Install the tire and wheel.
5. Lower the vehicle.