Accelerator Pedal Position Sensor: Service and Repair

Accelerator Pedal Position Sensor Replacement

Removal Procedure




1. Remove the insulator panel.
2. Disconnect the instrument panel (I/P) harness electrical connector (1) from the accelerator pedal position (APP) sensor.




3. Remove the APP sensor bolts.
4. Remove the APP sensor.

Installation Procedure




1. Position the APP sensor to the front of dash.

Notice: Refer to Fastener Notice.

2. Install the APP sensor bolts.

Tighten the bolts to 10 N.m (89 lb in).




3. Connect the I/P harness electrical connector (1) to the APP sensor.
4. Install the insulator panel.
5. Verify the operation of the accelerator pedal.