Operation CHARM: Car repair manuals for everyone.

Body Control Module: Service and Repair



Body Control Module Replacement

Removal Procedure

Important: You must perform the new body control module (BCM) setup when replacing the BCM. Refer to Body Control Module Programming and Setup.

1. Disconnect the negative battery cable.
2. Remove the console accessory wiring junction block.



3. Rotate the BCM retaining lever (1) to release the BCM from the console accessory wiring junction block.
4. Remove the BCM (2) from the console accessory wiring junction block.

Installation Procedure





Important: Align the BCM to the console accessory wiring junction block.

1. Install the BCM (1) onto the console accessory wiring junction block.
2. Rotate the BCM retaining lever (2) to secure the BCM to the console accessory wiring junction block.
3. Install the console accessory wiring junction block.
4. Connect the negative battery cable.
5. Perform the new BCM setup. Refer to Control Module References for programming and setup information. Programming and Relearning