Compressor/Pump Relay: Service and Repair

Automatic Level Control Relay Replacement

Removal Procedure

1. Raise and support vehicle. Refer to Vehicle Lifting.




2. Remove the electrical connector (1) from the relay (2).




3. Remove the relay bolt (1) from the bracket.




4. Remove the relay (1) from the compressor assembly.

Installation Procedure




1. Install the relay (1) to the compressor assembly.





Notice: Refer to Fastener Notice.

2. Install the relay nut (1) to the bracket.

Tighten nut to 6 N.m (53 lb in).




3. Install the electrical connector (1) to the relay (2).
4. Lower the vehicle.