12-Volt Accessory Power Receptacle Replacement

12-Volt Accessory Power Receptacle Replacement

Tools Required

J 42059 Cigar Lighter Socket Remover

Removal Procedure

1. Remove the 12-volt power supply fuse.




2. Remove the 12-volt power supply receptacle by placing one side of the "T" portion of J 42059 into the tab window. Angle the other side into the opposite tab window. Pull the 12-volt power supply receptacle straight out.
3. Remove J 42059 from the power supply receptacle.




4. Disconnect the electrical connector from the power supply receptacle.




5. Using your index finger, pull out the power supply retainer.

Installation Procedure




1. Position the 12-volt power supply retainer with the key to the slot into the power supply hole.




2. Install the power supply retainer pressing into place until fully seated.




3. Connect the electrical connector to the I/P power supply receptacle.




4. Position the power supply receptacle to the retainer.




5. Install the power supply receptacle into the I/P, pressing into place until fully seated.
6. Install the power supply fuse.
7. Inspect the power supply for proper operation.