Rear Suspension

Tie Rod Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.




2. Remove the tie rod bolt.
3. Remove the tie rod nut.
4. Remove the tie rod.

Installation Procedure




1. Install the tie rod.

Notice: Refer to Fastener Notice.

2. Install the tie rod nut.

Tighten the tie rod nut to 80 N.m (59 lb ft).

3. Install the tie rod bolt.

Tighten the tie rod bolt to 85 N.m (63 lb ft).

4. Adjust the rear toe angle.
5. Lower the vehicle.