127. Intake Manifold Installation

Intake Manifold Installation





1. Install the NEW lower intake manifold gasket.




2. Install the intake manifold assembly.





Notice: Refer to Fastener Notice .

3. Loosely install the short intake manifold bolts.




4. Loosely install the long intake manifold bolts.

Tighten all of the intake manifold bolts to 23 N.m (17 lb ft).





5. Install the left intake manifold insulator.




6. Install the left intake manifold insulator bolts.

Tighten the left intake manifold insulator bolts to 10 N.m (89 lb in).





7. Install the right intake manifold insulator.




8. Install the right intake manifold insulator bolts.

Tighten the right intake manifold insulator bolts to 10 N.m (89 lb in).





9. Install the evaporative emissions (EVAP) solenoid.




10. Install the EVAP solenoid bolt.

Tighten the EVAP solenoid bolt to 10 N.m (89 lb in).





11. Install and connect the intake manifold-to-solenoid EVAP hose to the intake manifold and to the EVAP solenoid.




12. Install the front intake manifold insulator.




13. Install and connect the dirty air positive crankcase ventilation (PCV) hose to the intake manifold and to the right camshaft cover fitting.




14. Install the rear intake manifold insulator.




15. Install and connect the fresh air PCV hose to the left camshaft cover fitting.